Product details
pplication:
Suitable for commercial and industrial use, it can cut canvas, synthetic fabric, cloth, rope and cord, lightweight foam, KT board pink foam, polyethylene, expanded polystyrene (EPS) and extruded polystyrene (XPS), styrofoam, polyester foam, sponge etc
FEATURES
-- Mainly used for cutting low density materials.
-- After cutting, the fracture is smooth, no loose edges, no burrs.
-- Can cut foam, low density sponge, pearl cotton, KT board, extruded board and other materials.
-- Low voltage output, safe and reliable, the output voltage does not exceed 5V, safe and reliable.
-- Alloy blade, pure copper knife seat, high temperature resistance, strong hardness and no deformation.
-- Infinitely temperature-controlled, the relative temperature can be adjusted according to different materials, and the effect is higher.
CAUTIONS
1. Avoid direct contact between the two blade holders to cause a short circuit.
2. Turn the temperature adjustment knob to the middle position, place the blade on the cutting object, and then press the trigger. The hot knife is preheated for a few seconds to cut. It is recommended to do the cutting test on the waste material first.
3. It is best to keep the temperature and speed in harmony when cutting.
4.Reduce the blade temperature or release the switch intermittently If there is too much smoke.
NOTES:
-- Please allow a bit error due to manual measurement. please make sure you do not mind before you bid.
-- The color may have different as the difference display, please understand.
